Free Shipping On Orders Over £50.

Menu
Logo
Menu
Muc-Off Stealth Tubeless Puncture Plugs
  • Muc-Off Stealth Tubeless Puncture Plugs
  • Muc-Off Stealth Tubeless Puncture Plugs
  • Muc-Off Stealth Tubeless Puncture Plugs
  • Muc-Off Stealth Tubeless Puncture Plugs
  • Muc-Off Stealth Tubeless Puncture Plugs
  • Muc-Off Stealth Tubeless Puncture Plugs
Product Code - 20298

Muc-off

MucOff Stealth Tubeless Puncture Plugs

  • Now £34.99
Buy & Collect From Quantity

Customers Rating:   Write a Review

Muc-Off Stealth Tubeless Puncture Plugs

Technical Specification

Muc-Off Stealth Tubeless Puncture Plugs

Small, lightweight and durable - Our stealth Tubeless puncture plug is the perfect tool to seal those gnarly punctures and get you out of trouble!

HIGHLIGHTS:

  • Screws into bars using a just a 4mm Allen key
  • Plugs and repairs multiple holes that won’t seal with just sealant
  • Available in 12 anodised colours to match your Muc-Off tubeless valves

When a puncture strikes just too big and gnarly to seal, the Muc-Off Stealth Tubeless Puncture Plug ultimate backup tool that’s cleverly stored inside your bar ends! The expanding silica plugs included cover most MTB, road and gravel handlebar sizes and the premium CNC Machined Aluminium bar ends are available in 12 anodised colours to match your ride.

Each lightweight and durable set contains everything you need to get back riding when you’re stuck battling a hole that’s just not sealing: a stainless steel 2-in-1 puncture plug reamer tool, a variety of different sized tyre worms and a trimming knife.

FEATURES

  • CNC Machined from 6061 Aluminium.
  • Expanding silica plug fits most MTB, Gravel & Road Handlebars with a larger than 17mm inside diameter.
  • Supplied with 17mm, 19mm and 21mm silica plugs to fit different handlebar diameters
  • Screws into bars using a just a 4mm Allen key
  • Plugs and Repairs multiple holes that won’t seal with just sealant
  • Compatible with most open-end grips and drops bars with a 84mm straight section at the bar end.
  • Dimensions 89 x 27 x 27mm
  • Weight: 33g per side (excluding tyre worms)
  • Available in 12 anodised colours to match your Muc-Off tubeless valves

HOW TO

  1. Identify the source of the puncture and remove the debris or puncture source
  2. Remove the tool from your bars using a 4mm Allen key. (If tool is pre-loaded skip to step 5) Start by using the integrated knurled reamer on the tool to clean and roughen up the hole to ensure a perfect seal.
  3. If the puncture requires the medium or larger worms then ream the hole several times with the knurled area of the tool, make sure you use a 45 degree angle and follow the direction of the tyre to ensure you don’t damage your tubeless tape or the tyre wall!
  4. Now Grab a tyre worm (you may need to use the tool to help slide out the worms). The largest size is for MTB tyres the medium for gravel tyres and the small for road tyres, but you can select the best one for your sized hole. Now pinch one end of the worm hard between your fingers to flatten it out. (If using the thin worm thread through the tip at the end of the tool, not the main larger slot)
  5. Thread through gap at the end of the tool so the worm is now sitting centrally on the tool.
  6. Locate the puncture hole then insert the tool through the hole (at a 45 degree angle and follow the direction of the tyre to ensure you don’t damage your tubeless tape or the tyre wall!) until the worm is around halfway through the tyre. Ensure the ends of the worm remain on the outside of the tire.
  7. Turning the tool slowly clockwise a few revolutions to twist the worm inside the tire and slowly pull up to remove – leaving the worm in your tyre and the hole plugged.
  8. Re-inflate tyre to your desired pressure. (We recommend a max of 80 PSI on a road bike!)
  9. Finally, using the knife carefully trim the worm ends. We suggest standing on the non-drive side of your bike and cutting away from the bike. Trim plugs down so there is a minimum of 3-5mm still sticking out of the tyre. (Caution – this is one sharp knife so please use with care and always cut away from your body and not too close to your fingers!!
  10. Now you’re ready to roll!



Newsletter

Subscribe to our Newsletter

On Your Bike
London

3 - 4 London Bridge Walk
London, SE1 2SX,
United Kingdom
Phone No. : 020 7378 6669
Email : london@onyourbike.com
Directions

Visit us
On Your Bike
Birmingham

92-Boldmere Rd, Boldmere,
Sutton Coldfield,
B73 5UB,
Phone No. : 0121 666 6933
Email : birmingham@onyourbike.com
Directions

Visit us
On Your Bike
East Grinstead

Felbridge Forge,
London Road, West Sussex,
RH19 2RQ
Phone No. : 01342 77 77 00
Email : eastgrinstead@onyourbike.com
Directions

Visit us
© On Your Bike | VAT 669 9389 48 | Terms
Top